Kitchenaid Refrigerator Error Code 1E

If your KitchenAid refrigerator displays Error Code 1E, it signals a malfunction in the freezer’s temperature sensor. This crucial component is responsible for accurately monitoring and regulating the freezer’s temperature. The error may indicate that the sensor is reading as either shorted or open, compromising its ability to provide accurate temperature data.

Possible Causes:

1. Faulty Temperature Sensor: The freezer’s temperature sensor may be damaged or malfunctioning, leading to inaccurate readings.
2. Wiring Issues: Disconnected or improperly connected wires to the temperature sensor can also trigger Error Code 1E.

Troubleshooting Steps:

1. Inspect Temperature Sensor:

   • Locate the freezer’s temperature sensor, usually positioned near the back wall inside the freezer compartment.
   • Check for any visible damage or signs of malfunction.

2. Check Wiring Connections:

   • Ensure that the wires connected to the temperature sensor are secure and not loose.
   • Look for any signs of frayed or damaged wires.

3. Reset the Refrigerator:

   • Power off the refrigerator and unplug it from the electrical outlet.
   • Wait for a few minutes before plugging it back in and turning it on.
   • Retry the refrigerator to see if the error persists.

4. Verify Freezer Temperature:

   • Use an external thermometer to independently check the temperature in the freezer.
   • If the temperature deviates significantly from the set point, it indicates a potential issue with the temperature sensor.

Note: Handling electrical components requires caution. If you are unsure or uncomfortable with troubleshooting, it is recommended to seek professional assistance to avoid further damage or injury. Contact KitchenAid Appliance Support at 844-432-6918 for expert help with KitchenAid Refrigerator Error Code 1E.